Skip to content
Pressbox
Menu

Technology · PRESS RELEASE

Completing a Mill Line from the Qianzhou Platform: Airflow or Overflow with a JRD Stenter

From the Qianzhou platform, Runda can pair RD HT airflow or HTHP overflow dyeing with a JRD stenter and supporting finishing equipment.

2026-11-20 Wuxi, Jiangsu, China Wuxi Runda Dye-Finishing Equipment Factory

Evidence Room · original sources and licensing →

Published this release?

Make a correction or update the public contact details. Sign in to verify your editing access.

Edit press release
Wuxi Runda workshop photo from official site

A dyeing vessel alone is not a finishing room. After colour is on the cloth, most mills still need drying, width setting or heat setting, and often supporting machines for take-up, coating or alkali reduction. Wuxi Runda Dye-Finishing Equipment Factory, founded in January 2004 in Qianzhou, Wuxi, presents itself as a supplier that can complete that line rather than sell one isolated machine.

Backed by the Wuxi Qianzhou textile dyeing and finishing machinery platform, the factory can supply virtually the full equipment line and deliver an optimized solution for the mill. On the rope-dyeing side the choice is between the RD HT airflow dyeing machine and the high-temperature high-pressure overflow. The RD HT is published at a liquor ratio of 1:2.5 (cotton as low as 1:3–1:3.5, synthetics as low as 1:2–1:2.5), with 1, 2, 4, 8 or 16 tubes and one tube able to run two ropes; working limits are 140 °C, 0.35 MPa and 500 m/min. The HTHP overflow is published at a maximum of 145 °C and a liquor ratio of 1:6–1:12, with fabric capacity up to 250 kg per tube. Open-width work stays on jiggers such as the SWRl400 jumbo jigger.

On the finishing side the JRD hot-air stenter covers a nominal width of 1,800–3,400 mm with an oven temperature of 220 °C, for drying, width setting and heat setting of woven and knit fabric. Supporting equipment from the same Qianzhou platform includes dryers, coating machines, alkali-reduction machines and cloth take-up units listed on the company site.

German technology, built in China — licensed airflow dyeing technology from Germany, manufactured locally in Wuxi — applies to the airflow machine. The factory’s workshop is about 3,000 square meters. Export markets named by the company include Vietnam, India, Bangladesh, Indonesia, Pakistan, Japan and Thailand.

Specify fabric, whether it is rope or open-width, dyeing temperature, stenter width and heat source, and the space available. Contact is below.

Heng Bao

+86 13382239366

bao@runda2008.com

https://www.runda2008.com/

PUBLISHING NEWS SINCE 1999

Your story could be next.

Publish free. Give people, search engines and AI tools a clear source to discover.

Publish your release free