Technology · PRESS RELEASE
One Series, Five Layouts: RD HT Airflow Machines from 1 to 16 Tubes
Runda publishes the RD HT airflow dyeing machine in 1, 2, 4, 8 or 16-tube layouts; one tube can run two ropes, with published liquor ratio 1:2.5.
A dyehouse that wants to trial a new shade should not have to buy the same vessel size it will later use for a production batch. Wuxi Runda Dye-Finishing Equipment Factory therefore publishes the RD HT airflow dyeing machine in five tube layouts: 1, 2, 4, 8 or 16 tubes. The series is one patented family (no patent number is published), with one mechanical idea: the rope is moved by air, not by a liquor jet, at a published liquor ratio of 1:2.5. German technology, built in China — licensed airflow dyeing technology from Germany, manufactured locally in Wuxi — is the framing on the official product page.
One tube can run two ropes. That detail is as useful as the tube count itself. A mill that needs more simultaneous ropes can add tubes without changing the dyeing principle, or double the ropes in a single tube when the fabric and process allow. A one-tube or two-tube machine is the right size for samples and small lots; four and eight tubes sit in ordinary production; sixteen tubes is the large layout the factory highlights as its patented 16-tube RD HT.
Published working limits are 140 °C, 0.35 MPa and a fabric speed of up to 500 m/min. Dye-contact metal is specified as S31603 stainless steel to GB 24511. The typical published arrangement is one 30 kW blower at 4,200 r/min for every two tubes, plus a high-head stainless centrifugal pump, a variable-frequency cloth lift, an adjustable nozzle and a swinging storage trough. A PTFE (Teflon) fabric-storage trough and VFD lift are stated as aiding level dyeing. PLC control stores and recalls recipes.
Environmental tightening is pushing mills off high-water machines that still run liquor ratios above 1:8. Against a conventional overflow machine, the factory publishes savings of more than 50% water, 40–50% steam, 5–15% dyes and 30–60% auxiliaries, with dye cycles about one-third shorter. Between 70% and 100% of rated load the liquor ratio can be held at 1:2.5–1:3.
An enquiry should name fabric type and weight, usual lot size, preferred tube count, and the steam, cooling water and floor space on site. Contact details are below.
Heng Bao
+86 13382239366
bao@runda2008.com
https://www.runda2008.com/