Technology · PRESS RELEASE
PTFE Storage Trough and VFD Lift on the RD HT Airflow Dyeing Machine
Runda’s RD HT airflow machine lists a PTFE (Teflon) fabric-storage trough and VFD cloth lift to support level dyeing on air-transported rope.
Level dyeing is not only a liquor-ratio problem. Rope machines also have to store, lift and return fabric without scraping the vessel or stacking one part of the rope on another so that shade differs from head to tail or from edge to centre. On the RD HT airflow dyeing machine from Wuxi Runda Dye-Finishing Equipment Factory, the official product description names a PTFE (Teflon) fabric-storage trough and a variable-frequency (VFD) cloth lift as part of that work.
The RD HT moves the rope with a blower-driven air stream. Dye liquor is circulated separately to wet, heat and dye the cloth, which is why the published liquor ratio is 1:2.5 (cotton as low as 1:3–1:3.5, synthetics as low as 1:2–1:2.5). Air transport is described as giving near-zero friction against the vessel, reducing abrasion and rope creases. The PTFE trough is a low-friction storage surface; the VFD lift controls how the rope is raised rather than pulling it at a fixed mechanical speed. Together with an adjustable nozzle, a swinging storage trough, a self-untangling device and an automatic lint scraper, they are intended to keep the rope moving evenly.
Published working limits remain 140 °C, 0.35 MPa and 500 m/min. Tube layouts are 1, 2, 4, 8 or 16, and one tube can run two ropes. PLC full-auto control stores recipes. The factory states that dye cycles are about one-third shorter than on traditional flow machines, and that compared with overflow dyeing the machine saves over 50% water, 40–50% steam, 5–15% dye and 30–60% auxiliaries. High-water machines running liquor ratios above 1:8 are under environmental pressure to be replaced.
German technology, built in China — licensed airflow dyeing technology from Germany, manufactured locally in Wuxi — is how the factory presents the machine. No patent number is published. Mills comparing rope options can also look at Runda’s own HTHP overflow (maximum 145 °C, liquor ratio 1:6–1:12) when a conventional jet is preferred.
Heng Bao
+86 13382239366
bao@runda2008.com
https://www.runda2008.com/