Skip to content
Pressbox
Menu

Technology · PRESS RELEASE

Published Working Limits of the RD HT: 140 °C, 0.35 MPa, 500 m/min

Runda publishes RD HT working limits of 140 °C, 0.35 MPa and 500 m/min alongside a 1:2.5 liquor ratio for airflow rope dyeing.

2026-11-20 Wuxi, Jiangsu, China Wuxi Runda Dye-Finishing Equipment Factory

Evidence Room · original sources and licensing →

Published this release?

Make a correction or update the public contact details. Sign in to verify your editing access.

Edit press release
RD HT 4-tube layout diagram, Wuxi Runda

Buyers comparing rope dyeing machines need the limits in writing, not only a liquor-ratio slogan. Wuxi Runda Dye-Finishing Equipment Factory publishes three working figures for the RD HT airflow dyeing machine: maximum working temperature 140 °C, maximum working pressure 0.35 MPa, and maximum fabric speed 500 m/min. Those numbers sit on the official English product page next to the liquor ratio of 1:2.5.

140 °C is the high-temperature envelope for many disperse-dye and synthetic rope processes on this vessel (Runda’s separate HTHP overflow is published at a maximum of 145 °C). 0.35 MPa is the published pressure limit of the airflow machine. 500 m/min is the published top fabric speed; circulation of a full load can be as short as about three minutes without reducing the load. Heating rates on the page are an average of 5 °C/min from 25 to 100 °C and 2.5 °C/min from 100 to 130 °C with dry saturated steam at 0.7 MPa.

The transport method is airflow, not a liquor jet. Tube counts are 1, 2, 4, 8 or 16, and one tube can run two ropes. A PTFE storage trough and VFD cloth lift are listed for level dyeing. Dye-contact material is S31603 stainless steel to GB 24511. German technology, built in China — licensed airflow dyeing technology from Germany, manufactured locally in Wuxi — describes the sourcing of the design.

Compared with traditional overflow dyeing, the factory publishes water savings of more than 50%, steam 40–50%, dyes 5–15% and auxiliaries 30–60%, with cycles about one-third shorter. Environmental tightening is accelerating the phase-out of high-water machines that still run liquor ratios above 1:8.

An enquiry should include fabric type and weight, lot size, preferred tube count, and on-site steam and cooling water. The factory is in Qianzhou, Wuxi, with a workshop of about 3,000 square meters, founded in January 2004.

Heng Bao

+86 13382239366

bao@runda2008.com

https://www.runda2008.com/

PUBLISHING NEWS SINCE 1999

Your story could be next.

Publish free. Give people, search engines and AI tools a clear source to discover.

Publish your release free